22 January 2005 Compensation of model eye's aberration by using deformable mirror
Author Affiliations +
Abstract
This paper reports on compensation for human eye aberration using a membrane deformable mirror(DM) which is fabricated by the MEMS process. The DM consists of a silicon(Si) membrane formed by processing of an SOI wafer and 85 electrodes. The diameter of Si membrane is 12mm and the maximum displacement is 16μm at a driving voltage of 180V. We have successfully demonstrated compensation for a model eye's aberration by using the DM. The model eye's aberration measured by the Shack-Hartmann wavefront sensor was expanded into Zernike polynomials and the driving voltages for the DM were decided so that the membrane shape would cancel out the eye's aberration by using appropriate voltage arrangements for each of the Zernike polynomials, these arrangements being predetermined experimentally. We have corrected the aberration of the model eye to less than 0.1μm-RMS. In this experiment, the effective diameter of the DM was 7.5mm, and the pupil of the model eye was 8.5mm.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroyuki Kawashima, Hiroyuki Kawashima, Michiko Nakanishi, Michiko Nakanishi, Noriko Takeda, Noriko Takeda, Isao Minegishi, Isao Minegishi, Akio Kobayashi, Akio Kobayashi, } "Compensation of model eye's aberration by using deformable mirror", Proc. SPIE 5717, MEMS/MOEMS Components and Their Applications II, (22 January 2005); doi: 10.1117/12.589942; https://doi.org/10.1117/12.589942
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT


Back to Top