Translator Disclaimer
15 January 1986 Epoxyless Polishless Plastic Connector For Multimode Fibers
Author Affiliations +
Abstract
A new plastic connector was developed for a 200/250 micron multimode fiber that does not use epoxy, nor needs polishing to complete the assembly, hence termed epoxyless and polishless connector. The insertion loss for a mated pair had a mean value of 0.93 dB and the time required to assemble this connector to a cable was less than two minutes. When subjected to environmental testing the connector did not exhibit any deterioration in perform-ance.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Margolin, I. Grois, M. Iyengar, and J. E. Moore "Epoxyless Polishless Plastic Connector For Multimode Fibers", Proc. SPIE 0574, Fiber Optic Couplers, Connectors, and Splice Technology II, (15 January 1986); https://doi.org/10.1117/12.950716
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Fiber optic sensor for flow and viscosity measurement
Proceedings of SPIE (March 31 2016)
IEEE 802.3 Fiber Optic Inter-Repeater Link
Proceedings of SPIE (December 31 1986)
Thick Film Fiber Optics To Integrated Optics Interface
Proceedings of SPIE (July 25 1979)
Fibre Optic Inserts For DIN 41612 PCB Connectors
Proceedings of SPIE (October 05 1986)

Back to Top