21 April 2005 Fabrication of holographic input coupler for optical storage device using photopolymer
Author Affiliations +
Abstract
Holographic transmission gratings with 0o;-Bragg angle are widely used to couple light into and out of waveguides due to their high diffraction efficiencies and planar packaging. In this paper, a holographic grating coupler based on the photopolymer has been designed and experimentally demonstrated. To achieve the high diffraction efficiencies, we investigate the optical properties of the coupler according to the exposure energy at the 405 nm wavelength. For the asymmetrical geometry with 72othe correction of the Bragg angles shift of about 0.95o; and 3.45o;, which are induced by the 7.86% shrinkage factor, is successfully demonstrated. The performance and the optical characteristics of the coupler using volume holographic grating are discussed in detail.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang Won Shin, Chang Won Shin, Nam Kim, Nam Kim, Jung Hoi Kim, Jung Hoi Kim, Viet Tien Vu, Viet Tien Vu, Dong Woo Suh, Dong Woo Suh, Mun Cheol Paek, Mun Cheol Paek, Yong Woo Park, Yong Woo Park, } "Fabrication of holographic input coupler for optical storage device using photopolymer", Proc. SPIE 5742, Practical Holography XIX: Materials and Applications, (21 April 2005); doi: 10.1117/12.590341; https://doi.org/10.1117/12.590341
PROCEEDINGS
8 PAGES


SHARE
Back to Top