Paper
6 May 2005 Flare and lens aberration requirements for EUV lithographic tools
Author Affiliations +
Abstract
EUV lithographic tools can support the 32 nm MPU manufacturing node and beyond. In order to meet the stringent requirements on CD control and overlay for such technology generations, wavefront error and flare of the EUV exposure systems have to be well controlled. The cross field variations of wavefront errors and flare need to be in the acceptable range in order to improve the common Depth of Focus (DoF) across the field. The impacts of lens aberration and flare to the aerial image at the system level are studied for the 32nm MPU technology node using Intel's aerial image simulation tool. The focus control budget of the exposure tools has been estimated. Useable Depth of Focus (UDoF) has been defined, and focus margin between UDoF and focus control budget from the exposure tool has been calculated for various cases. Focus margin has been used to determine the flare and lens aberration requirements for the 32nm MPU node. It is found that <10% intrinsic flare and <0.75nm rms lens aberration are required for the 32nm MPU node. Process window as a measure of individual aberration terms for the 32nm node has been also investigated.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sang Hun Lee, Yashesh Shroff, and Manish Chandhok "Flare and lens aberration requirements for EUV lithographic tools", Proc. SPIE 5751, Emerging Lithographic Technologies IX, (6 May 2005); https://doi.org/10.1117/12.604870
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Extreme ultraviolet lithography

Lithography

Extreme ultraviolet

Wavefronts

Control systems

Photomasks

RELATED CONTENT


Back to Top