Line edge roughness reduction by plasma curing photoresists

Arpan P. Mahorowala; Kuang-Jung Chen; Ratnam Sooriyakumaran; Aleksandra Clancy; Dakshi Murthy; Stacy Rasgon

doi:10.1117/12.600043

4 May 2005 Line edge roughness reduction by plasma curing photoresists

Arpan P. Mahorowala, Kuang-Jung Chen, Ratnam Sooriyakumaran, Aleksandra Clancy, Dakshi Murthy, Stacy Rasgon

Proceedings Volume 5753, Advances in Resist Technology and Processing XXII; (2005) https://doi.org/10.1117/12.600043
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

Photoresist line edge roughness (LER) has been highlighted to have an adverse impact on device performance whereas post-etch LER is probably the more relevant metric. Post-etch LER can be reduced by migrating to thicker photoresist films or developing etch processes that are accompanied with lower energy ion bombardment. However, the photoresist and etching processes chosen might have desirable attributes and therefore cannot be changed, e.g. large process window or minimal nested-isolated feature etch bias. In this paper, we demonstrate the reduction of LER at the polysilicon gate level by an inexpensive treatment prior to etch. This HBr plasma treatment can be performed in the main etch chamber with minimal impact on wafer throughput. As a result, during the following etch steps, the photoresist mask is more homogeneous from an etch perspective which in turn helps lower the final LER. In addition, results from blanket etch studies on the various photoresist component films are shown. FTIR spectra of unetched and etched films are compared to demonstrate the preferential etching of certain photoresist/polymer components. The large differences observed in the unetched and etched film surface roughness values for certain photoresist components is postulated as an important source of final LER.

Citation Download Citation

Arpan P. Mahorowala, Kuang-Jung Chen, Ratnam Sooriyakumaran, Aleksandra Clancy, Dakshi Murthy, and Stacy Rasgon "Line edge roughness reduction by plasma curing photoresists", Proc. SPIE 5753, Advances in Resist Technology and Processing XXII, (4 May 2005); https://doi.org/10.1117/12.600043

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available