Paper
12 May 2005 Controlled contamination studies in 193-nm immersion lithography
V. Liberman, S. T. Palmacci, D. E. Hardy, M. Rothschild, A. Grenville
Author Affiliations +
Abstract
In liquid immersion lithography the last optical element is in intimate contact with the liquid for extended periods of time, and therefore is at risk of being contaminated by impurities in the liquid. The purity of the liquid must be kept under stringent control compared to "dry" lithography, since the density of liquid is ~ 1000 times higher than that of gas. Thus, 1 part per billion contaminant in the liquid may have an equivalent effect on the optics to 1 part per million in gas. The risk is that the combination of high contaminant density, short wavelength, and large laser dose will conspire to contaminate the optics, change its transmission, and possibly cause increased flare. In order to clarify the potential for such effects, we have begun a set of experiments with controlled contamination. In these studies, a 193-nm laser irradiates a sample in the presence of flowing clean water into which controlled amounts of contaminant have been injected. The sample is either bare fused silica or calcium fluoride protected with thin films. Results will be presented with organic contaminants such as isopropanol and acetone. These results will include an analysis on the implications for controlling water purity.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. Liberman, S. T. Palmacci, D. E. Hardy, M. Rothschild, and A. Grenville "Controlled contamination studies in 193-nm immersion lithography", Proc. SPIE 5754, Optical Microlithography XVIII, (12 May 2005); https://doi.org/10.1117/12.601473
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Liquids

Immersion lithography

Silicon

Ultraviolet radiation

Absorption

Lithography

Back to Top