Paper
12 May 2005 Mid-range flare measurement and modeling
Kazuya Sato, Kenji Chiba, Kei Hayasaki, Kenji Kawano
Author Affiliations +
Abstract
Mid-range flare (MRF) of an ArF exposure tool induces resist critical dimension (CD) variation depending on local mask (or resist) pattern density. CD correction techniques such as mask CD modification are needed to compensate MRF-induced CD variation and obtain sufficient resist CD uniformity. For this purpose, MRF should be accurately characterized and distinguished from other factors of similar influence caused by photoresist, mask, and so on. We have investigated a method of measuring magnitude and affected range of MRF in an exposure tool easily. In this method, double exposure of L/S with large area and a small square "window" in a widely shielded area is executed on a positive photoresist layer. After bake and development, resist CDs of the L/S are measured from near the window to far from the window using scanning electron microscope. An overcoat layer is used to exclude the influence of acid evaporation from photoresist and re-sticking. L/S mask shows small CD variation because local pattern density is uniform, and so influence of mask error on MRF measurement is small. Influence of MRF is shown in the graph of distance from window edge versus CD. From the distance-ΔCD curve, point spread function (PSF) which represents the characteristics of MRF can be obtained. Comparison of experimentally obtained MRF-induced CD variation, which appears in the periphery of a memory cell area, and calculated CD variation using the PSF obtained in the exposure tool showed good agreement.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kazuya Sato, Kenji Chiba, Kei Hayasaki, and Kenji Kawano "Mid-range flare measurement and modeling", Proc. SPIE 5754, Optical Microlithography XVIII, (12 May 2005); https://doi.org/10.1117/12.599605
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Magnetorheological finishing

Photomasks

Point spread functions

Double patterning technology

Photoresist materials

Photoresist developing

RELATED CONTENT


Back to Top