Lithography simulation system for total CD control from design to manufacturing

Toshiya Kotani; Hirotaka Ichikawa; Sachiko Kobayashi; Shigeki Nojima; Kyoko Izuha; Satoshi Tanaka; Soichi Inoue

doi:10.1117/12.601132

5 May 2005 Lithography simulation system for total CD control from design to manufacturing

Toshiya Kotani, Hirotaka Ichikawa, Sachiko Kobayashi, Shigeki Nojima, Kyoko Izuha, Satoshi Tanaka, Soichi Inoue

Proceedings Volume 5756, Design and Process Integration for Microelectronic Manufacturing III; (2005) https://doi.org/10.1117/12.601132
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

Systematic design for manufacturability ( DfM ) scheme including triple gates for hot spot elimination under the low-k₁ lithography condition is proposed and efficient approaches to the hot spot elimination at each development stage in the DfM scheme are discussed in view of the actual situation under the concurrent development of design rule ( DR ), layout, process, optical proximity correction ( OPC ) and resolution enhancement technique ( RET ) technologies. Integrated-type lithography simulation system with OPC tool is much available for the fast processing at the initial stage and promising to be complementarily used for the verification of chip-level layout with conventional-type one at the final development stage. Low order of the lithography empirical model originating moderate prediction accuracy for all kinds of patterns is hopeful to be used at the initial development stage because it is difficult to obtain a lot of reliable experimental data for making the accurate empirical lithography model due to frequent improvement of the process, OPC and RET technologies. At the final development stage, sufficient and reliable experimental data for device pattern variations allow us to implement the higher order of the empirical model. The DfM scheme with efficient approaches in view of the actual situation under the concurrent development is found to be promising for the robust pattern formation under the low-k₁ lithography condition.

Citation Download Citation

Toshiya Kotani, Hirotaka Ichikawa, Sachiko Kobayashi, Shigeki Nojima, Kyoko Izuha, Satoshi Tanaka, and Soichi Inoue "Lithography simulation system for total CD control from design to manufacturing", Proc. SPIE 5756, Design and Process Integration for Microelectronic Manufacturing III, (5 May 2005); https://doi.org/10.1117/12.601132

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available