16 May 2005 Comparison of the damping and stiffness properties of 8wt% yttria stabilized zirconia ceramic coating deposited by the APS and EB-PVD techniques
Author Affiliations +
Abstract
Recent research into the use of thermal barrier coatings has shown that they can provide sufficient additional damping, reducing vibration levels and significantly extending the life of the coated component. Various deposition techniques may be employed to apply ceramic coatings with Air Plasma Spraying (APS) and Electron Beam - Physical Vapour Deposition (EB-PVD) being the most widely used. However, one has to take into account that even when the starting ceramic material is the same, the microstructures of the resultant coatings depend strongly on the deposition technique. The objective of this paper is to study of the differences in the damping behaviour and stiffness of an yttria-stabilised zirconia (YSZ with 8%wt yttria) coating deposited by APS and by EB-PVD. Both damping and stiffness of these two YSZ coatings were estimated from tests performed at room and high temperatures. Moreover, this paper presents the microstructural characterisation of these two YSZ coatings using scanning electron microscopy, and attempts a correlation of the differences in their properties to their microstructure.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. Tassini, K. Lambrinou, I. Mircea, S. Patsias, O. Van der Biest, R. Stanway, "Comparison of the damping and stiffness properties of 8wt% yttria stabilized zirconia ceramic coating deposited by the APS and EB-PVD techniques", Proc. SPIE 5760, Smart Structures and Materials 2005: Damping and Isolation, (16 May 2005); doi: 10.1117/12.600711; https://doi.org/10.1117/12.600711
PROCEEDINGS
9 PAGES


SHARE
Back to Top