Carbon nanotube-coated electroactive paper (EAPap) as hybrid high-displacement actuator

Sungryul Yun; Jaehwan Kim; Zoubeida Ounaies; T. St Clair

doi:10.1117/12.600142

16 May 2005 Carbon nanotube-coated electroactive paper (EAPap) as hybrid high-displacement actuator

Sungryul Yun, Jaehwan Kim, Zoubeida Ounaies, T. St Clair

Proceedings Volume 5761, Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics; (2005) https://doi.org/10.1117/12.600142
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

Electro-Active Paper (EAPap) has been investigated as an attractive EAP material for artificial muscles due to its many advantages such as lightweight, availability, low cost, large displacement output, low actuation voltage and low power consumption. The EAPap is based on cellulose material, and is shown to involve primarily transport of ions in response to an external electric field. Depending on the electrode material, EAPap has shown actuation displacement in the range of 2-4mm, at a few volts. Drawbacks of EAPap actuators include a low force output and a dependence on humidity. To address these limitations, a hybrid EAPap actuator is developed by incorporating an electrode fabricated using single-wall carbon nanotubes (SWNT)/Polyaniline (PANI) with different dopants. SWNT is dispersed in 1-Methy-2-pyrrolidone (NMP), and the resulting solution is used as a solvent for PANI and the various dopants. The SWNT/PANI/NMP solution is then deposited on the EAPap by spin coating. The coated EAPap is dried in a vacuum oven. Raman spectroscopy, X-Ray diffractometry and SEM tests are taken to confirm that the SWNT/PANI/dopant electrode material is successfully prepared by in situ polymerization. The actuation output of the SWNT/PANI/EAPap samples is tested in an environmental chamber in terms of free displacement and blocked force. When the SWNT/PANI/Cl- coated hybrid actuator is excited with 7Vp-p, a maximum displacement of 3.1mm and a maximum power output of 0.29mW are obtained. The hybrid actuator shows an improved actuation force as a result of enhanced stiffness of EAPap.

Citation Download Citation

Sungryul Yun, Jaehwan Kim, Zoubeida Ounaies, and T. St Clair "Carbon nanotube-coated electroactive paper (EAPap) as hybrid high-displacement actuator", Proc. SPIE 5761, Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics, (16 May 2005); https://doi.org/10.1117/12.600142

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available