Translator Disclaimer
Paper
17 May 2005 Application of EM stress sensors in large steel cables
Author Affiliations +
Abstract
In this paper, the calibration and workability of magnetoelastic (ME or EM) stress sensors for large steel cables used in Qiangjiang 4th bridge in China are discussed. As an engineering application of magnetoelasticity, EM sensors make non-contact stress monitoring possible for steel hangers and post-tensioned cables on suspension and cable-stayed bridges, and other ferromagnetic structures. By quantifying the correlation of tension with magnetic properties represented by the relative permeability of the steel structure itself, the EM sensor inspects the loading level of the steel structure. The tension dependence of the relative permeability and the temperature influence was calibrated. The results revealed that the magnetoelasticity of the multi-wire hangers is consistent with one another, while the post-tensioned cables are similar to single wires. Cable stress monitoring on Qiangjiang (Qj) 4th bridge demonstrated the reliability of the EM sensors in safety evaluation of bridge.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guodun Wang, Ming L. Wang, Yang Zhao, Yong Chen, and Bingnan Sun "Application of EM stress sensors in large steel cables", Proc. SPIE 5765, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, (17 May 2005); https://doi.org/10.1117/12.598087
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top