17 May 2005 The SHM system using self-diagnosis material and wireless data measurement device
Author Affiliations +
In recent years, the importance of Structural Health Monitoring has been recognized but an SHM system still confronts serious problems related to complexity and cost in practical use. To solve these problems, the authors have developed the simple and smart SHM system by integrating self-diagnosis material and a wireless data measurement device. By installing this SHM system, it is possible to detect damage to structures easily even after a large earthquake or other disaster and also to inspect possible deterioration of a structure in a short time. As a practical matter this SHM system is expected to be very reliable, and when it is mass-produced it should have a low cost. To confirm the utility of the damage detection of a building after a large earthquake, the pre-production system was installed in a specimen simulating the beam-to-column connection part in a mid-size conventional reinforced concrete building, and a loading test was performed on the specimen. The effectiveness of the proposed system is demonstrated by the test results.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Shiraishi, M. Shiraishi, H. Kumagai, H. Kumagai, H. Inada, H. Inada, Y. Okuhara, Y. Okuhara, H. Matsubara, H. Matsubara, } "The SHM system using self-diagnosis material and wireless data measurement device", Proc. SPIE 5765, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, (17 May 2005); doi: 10.1117/12.599377; https://doi.org/10.1117/12.599377

Back to Top