19 May 2005 Quality control and health monitoring of aerospace composites via quadrupole resonance
Author Affiliations +
Abstract
Techniques for quality control and health monitoring of aerospace composite structures must be reliable, nonintrusive and preferably, non-contacting. Quadrupole resonance (QR) spectroscopy can fill this need. Previously, we have demonstrated that Quadrupole Resonance can be used for nondestructive inspection of polymeric fiber-reinforced composites, which can be exploited for both in-service inspection and on-going structural health monitoring.1-6 In this paper we present an extension of this work, applying the QR method to the quality control of composite parts manufactured via pultrusion. In order to use the QR method for quality control of composite parts they must contain a small amount of tiny crystals of a QR active compound. These crystals are embedded in the part during the manufacture by blending it into the uncured resin. The QR active crystals sense any residual strains that may form inside the part during the manufacturing process. The crystals are interrogated via a single-side coil detector head, which transmits radio frequency (RF) pulses into the composite part. The strain-dependent QR response from the crystals is picked up by the same detector head. The results presented in this paper demonstrate that the QR method is very successful at distinguishing composites parts manufactured under optimal conditions from those that were manufactured with a misaligned die or at reduced temperatures. Both QR frequency and line widths were used as a distinguishing parameter.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Catherine Ward, Catherine Ward, Stephanie A. Vierkoetter, Stephanie A. Vierkoetter, } "Quality control and health monitoring of aerospace composites via quadrupole resonance", Proc. SPIE 5767, Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure IV, (19 May 2005); doi: 10.1117/12.598974; https://doi.org/10.1117/12.598974
PROCEEDINGS
11 PAGES


SHARE
Back to Top