Presently a large number of superconducting accelerators under construction or proposed impose stringent requirements on the rf control of the accelerating fields, operability, and reliability. The accelerator application range from linear colliders, UV-FELs and X-FELs, ERL based light sources, high power proton accelerators to heavy ion accelerators. Examples are TESLA and NLC, the European XFEL and Lux, the Cornell ERL based light source, the high power ERL based IR-FEL at JLAB, the neutron spallation source SNS, the heavy ion accelerator RIA, and the energy upgrade of the CEBAF accelerator at JLAB. The requirements on the rf systems range from low to high current, medium to high gradient, and relativistic to non-relativistics beam. With the technology in analog and digital electronics developing rapidly, the technology for rf feedback system is changing more and more from analog or hybrid systems towards fully digital systems. Todays DSPs and FPGAs can process sophisticated feedback algorithms on a time scale of some 100 ns to a few us with ADCs and DACs with about 100 MHz bandwidth at 14 bit and latencies less than 100 ns available to inter-face to the field detectors and field control actuators. Also fast analog multiplier technology allows for field detection and actuators for rf control with high linearity, measurement and control bandwidth while maintaining low noise levels.