23 March 2005 Industrial COIL systems--part 2: gas-laser cutting
Author Affiliations +
Proceedings Volume 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2005) https://doi.org/10.1117/12.611139
Event: XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2004, Prague, Czech Republic
Abstract
First results of experimental and theoretical investigations concerning an industrial application of oxygen-iodine laser (COIL) are reported. The dependencies of the largest cut depth on the laser emission power, cut width and rate, and kind of processing gas (oxygen or nitrogen) were determined for carbon and stainless steels, and aluminium alloys. A developed simple engineering model determines parameters of separating gas-laser cutting of metals allowing for principal channels of heat loss: warming, melting, material evaporation and heat conductivity, convection and radiant heat exchange. It was shown that when oxygen is applied as a processing gas it is necessary to take into account the additional heat emanation that is usually about 10% of the material oxidation energy. A good agreement between calculative and experimental data was obtained.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yury V. Kolobyanin, Yury V. Kolobyanin, Il'ya A. Bulatkin, Il'ya A. Bulatkin, Vladimir V. Kalinovskiy, Vladimir V. Kalinovskiy, Vladimir V. Konovalov, Vladimir V. Konovalov, Vladimir B. Moiseev, Vladimir B. Moiseev, Victor D. Nickolaev, Victor D. Nickolaev, Lev N. Shornikov, Lev N. Shornikov, Roman E. Sobolev, Roman E. Sobolev, Boris A. Vyskubenko, Boris A. Vyskubenko, } "Industrial COIL systems--part 2: gas-laser cutting", Proc. SPIE 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (23 March 2005); doi: 10.1117/12.611139; https://doi.org/10.1117/12.611139
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Review of the simple model for metal cutting with the...
Proceedings of SPIE (January 13 2000)
CO[sub]2[/sub] Laser Cutting Of Non-Ferrous Metals
Proceedings of SPIE (March 23 1989)
Effects of gas mixing on COIL performance
Proceedings of SPIE (December 21 1998)
Some Considerations On Laser Metal Cutting
Proceedings of SPIE (June 19 1989)
Diffusers of COIL and DF-lasers
Proceedings of SPIE (March 22 2005)

Back to Top