Paper
23 March 2005 Observation of various material surfaces irradiated and cratered with focused ArF laser lights
Koichi Kasuya, Waldemar Mroz, Artur Prokopiuk, Takayoshi Notimatsu, Yasukazu Izawa, Sadao Nakai
Author Affiliations +
Proceedings Volume 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2005) https://doi.org/10.1117/12.611328
Event: XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2004, Prague, Czech Republic
Abstract
It is necessary to know the ablation rates of various material surfaces under the irradiation of intense UV laser lights, as one of the ablating beams, when we design the future inertial fusion reacotrs driven by big lasers. So that, we irradiated various materials with a UV laser light. The laser wavelength, the pulse width and the maximum repetition rate were 193 nm, 20 ns, and 50 Hz. Irradiated materials were LiPb, Pb as the wet wall candidates of the inertial fusion reactors, while W, C, Al2O3, SiC and SiC-Si composite material as the dry wall candidates were also irradiated. The changes of teh irradiated surface conditions under different irradiation conditions were observed with three different kinds of optical diagnostic tools. The structures of the produced craters were investigated precisely. We could know how strong the tungsten was against such laser ablations, compared with LiPb or Pb etc..
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Koichi Kasuya, Waldemar Mroz, Artur Prokopiuk, Takayoshi Notimatsu, Yasukazu Izawa, and Sadao Nakai "Observation of various material surfaces irradiated and cratered with focused ArF laser lights", Proc. SPIE 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (23 March 2005); https://doi.org/10.1117/12.611328
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Excimer lasers

Lead

Microscopes

Laser ablation

Pulsed laser deposition

Tungsten

Back to Top