IRT analysis on historic buildings: toward a controlled convection heating

Elisabetta Rosina; Nicola Ludwig; Veronica Redaelli; Stefano Della Torre; Simona D'Ascola; Michela Catalano; Chiara Faliva

doi:10.1117/12.604646

28 March 2005 IRT analysis on historic buildings: toward a controlled convection heating

Elisabetta Rosina, Nicola Ludwig, Veronica Redaelli, Stefano Della Torre, Simona D'Ascola, Michela Catalano, Chiara Faliva

Author Affiliations +

Proceedings Volume 5782, Thermosense XXVII; (2005) https://doi.org/10.1117/12.604646
Event: Defense and Security, 2005, Orlando, Florida, United States

Abstract

Many applications of IRT on buildings require active approach. The solicitation has to be properly calculated, and the application has to take in account the optical characteristics of the surface and its thermal properties. In fact, non-homogeneities of the surface definitively affect the absorbance and reflectance of materials, as shown in literature. Therefore, in case of different colors like artistic paintings, dark stains and salts deposition a convection heating results more effective for IRT inspection, because it does not stimulate different localized absorption due to the colors. Using fan coil heaters, major difficulty is to obtain an even heating on the wall under inspection. The laboratory tests permitted to verify that the strength of rising warm air is higher than the one due to the heater ventilation. As a consequence, the effects of heating on the wall start from the upper part and decrease in a non-proportional way to the bottom. On the other side, thermal flux from a heater changes direction according to the geometry of the room, ambient conditions (initial temperature of the air, openings, etc), technical characteristics of the heater (power, speed of the fan, shape, etc) and its location (orientation, elevation, distance from the surface under investigation, etc). In addition, the increase of air temperature does not directly correspond to the increase of the surface temperature. The paper shows the characterization of a convective heating source, by laboratory measurements; to map the distribution of heat in time, the 14.000-26.000 kcal/h heater flux was measured following a 3D grid, by anemometers, probes, and IR Thermography.

Citation Download Citation

Elisabetta Rosina, Nicola Ludwig, Veronica Redaelli, Stefano Della Torre, Simona D'Ascola, Michela Catalano, and Chiara Faliva "IRT analysis on historic buildings: toward a controlled convection heating", Proc. SPIE 5782, Thermosense XXVII, (28 March 2005); https://doi.org/10.1117/12.604646

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available