28 March 2005 Toward quantitative aerial thermal infrared thermography for energy conservation in the built environment
Author Affiliations +
Abstract
The UK Home Energy Conservation Act puts a duty on local authorities to develop strategies to improve energy efficiency in all public and private sector housing in order to tackle fuel poverty and reduce carbon dioxide emissions. The City of Nottingham, UK turned to aerial Thermal InfraRed Thermography (TIRT) to try and identify households where energy savings can be made. In this paper, existing literature is reviewed to explain the limitations of aerial TIRT for energy conservation in the built environment and define the techniques required to overcome them. This includes the range of suitable meteorological conditions at the time of the survey, the use of ground truth data, the need to account for all radiation paths and losses when calculating roof surface temperature and the assumptions that must be made when calculating insulation levels. Atmospheric calibration, roof surface emissivity and sky view factor must also be determined by some means and approaches to these problems are reviewed from the wider literature. Error analysis and benchmarking are important if the technique is to be validated and these are discussed with reference to the literature. A methodology for determining the thickness of loft insulation for residential buildings in the city of Nottingham, UK using aerial TIRT data within a GIS software environment is proposed.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Allinson, David Allinson, Benachir Medjdoub, Benachir Medjdoub, Robin Wilson, Robin Wilson, } "Toward quantitative aerial thermal infrared thermography for energy conservation in the built environment", Proc. SPIE 5782, Thermosense XXVII, (28 March 2005); doi: 10.1117/12.602695; https://doi.org/10.1117/12.602695
PROCEEDINGS
12 PAGES


SHARE
Back to Top