20 May 2005 Current efforts on developing an HWIL synthetic environment for LADAR sensor testing at AMRDEC
Author Affiliations +
Abstract
Efforts in developing a synthetic environment for testing LADAR sensors in a hardware-in-the-loop simulation are continuing at the Aviation and Missile Research, Engineering, and Development Center (AMRDEC) of the U.S. Army Research, Engineering and Development Command (RDECOM). Current activities have concentrated on developing the optical projection hardware portion of the synthetic environment. These activities range from system level design down to component level testing. Of particular interest have been schemes for generating the optical signals representing the individual pixels of the projection. Several approaches have been investigated and tested with emphasis on operating wavelength, intensity dynamic range and uniformity, and flexibility in pixel waveform generation. This paper will discuss some of the results from these current efforts at RDECOM's Advanced Simulation Center (ASC).
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hajin J. Kim, Hajin J. Kim, Michael C. Cornell, Michael C. Cornell, Charles B. Naumann, Charles B. Naumann, } "Current efforts on developing an HWIL synthetic environment for LADAR sensor testing at AMRDEC", Proc. SPIE 5785, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing X, (20 May 2005); doi: 10.1117/12.606023; https://doi.org/10.1117/12.606023
PROCEEDINGS
9 PAGES


SHARE
Back to Top