Paper
3 June 2005 Low temperature epoxy-free and flux-less bonding process applied to solid-state microchip laser
Christophe Kopp, Karen Gilbert
Author Affiliations +
Abstract
Epoxy free bonding is decisive to improve reliability of optoelectronic devices using active components such as laser diode. Therefore soldering is usually preferred as bonding technology but it often needs components metallizing, heating over 140°C and liquid or gas fluxing which may let some corrosive residues. Thus soldering cannot be widely used on optical microchip components. Working on solid-state microchip laser bonding in a project called NANOPACK supported by the French research ministry, we have developed low temperature epoxy free bonding technology. The microchip laser is bonded onto a submount by thermocompression at low temperature and moderate relative pressure using an indium foil to form the adhesive joint. This technology uses both a unique property of indium to wet and to bond to certain non-metallics such as glass, quartz, and various metallic oxides, and fluxless soldering of indium with gold by solid-state interdiffusion bonding or solid-liquid interdiffusion bonding. This way, mean bond strength about 300g/mm2 has been obtained for 2mg chip with very good resistance to thermal aging. This epoxy free technology offers a real alternative for bonding non-metallic components which cannot stand usual soldering processes. Moreover, as it is a fluxless process, this technology is very attractive to hermetically seal lids under controlled atmosphere.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christophe Kopp and Karen Gilbert "Low temperature epoxy-free and flux-less bonding process applied to solid-state microchip laser", Proc. SPIE 5825, Opto-Ireland 2005: Optoelectronics, Photonic Devices, and Optical Networks, (3 June 2005); https://doi.org/10.1117/12.594551
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Indium

Laser bonding

Semiconductor lasers

Solid state electronics

Gold

Silicon

Solid state lasers

RELATED CONTENT


Back to Top