1 July 2005 Micromachined IR-source with excellent blackbody like behaviour (Invited Paper)
Author Affiliations +
There are several micro sized thermal emitters commercially available, but compared with an ideal black body radiator, their emissivity and thus the emitted radiation is moderate. This was the motivation to develop a novel type of micromachined thermal IR-emitters. The main difference compared with common thermal micro emitters is the use of 2D structured bulk silicon. The regular ordered macropores of the emitters are obtained by electrochemical etching of prepatterend silicon substrates. Typical pore diameter of the fabricated photonic-crystal-like structures are in the range of 2.5 μm to 30 μm. The macroporous silicon shows a black-body-like emission profile for a wide wavelength range.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. Konz, W. Konz, J. Hildenbrand, J. Hildenbrand, M. Bauersfeld, M. Bauersfeld, S. Hartwig, S. Hartwig, A. Lambrecht, A. Lambrecht, V. Lehmann, V. Lehmann, J. Wollenstein, J. Wollenstein, } "Micromachined IR-source with excellent blackbody like behaviour (Invited Paper)", Proc. SPIE 5836, Smart Sensors, Actuators, and MEMS II, (1 July 2005); doi: 10.1117/12.608712; https://doi.org/10.1117/12.608712


Non-selective NDIR array for gas detection
Proceedings of SPIE (June 30 2005)
Glass Temperature Measurement For The Glass Industry
Proceedings of SPIE (March 20 1983)
Photonic crystals for narrow-band infrared emission
Proceedings of SPIE (February 06 2002)
Selective photodevices for the VUV
Proceedings of SPIE (December 31 1991)

Back to Top