Translator Disclaimer
Paper
28 June 2005 Dual layer patterning failures in complex RET processes using ORC tools and pre- or post-optical proximity correction strategy
Author Affiliations +
Proceedings Volume 5853, Photomask and Next-Generation Lithography Mask Technology XII; (2005) https://doi.org/10.1117/12.617412
Event: Photomask and Next Generation Lithography Mask Technology XII, 2005, Yokohama, Japan
Abstract
The 65nm and 45nm device generations will be used to manufacture large designs using complex patterning processes in combination with exotic model-based or rule-based RETs’ scenarios. The lithography for these generations will operate in the low k1 regime value resulting in small process window and tight overlay requirements. Therefore, the potential for having yield limiting errors due to RET-process-design interactions is significantly higher than with the 130nm generation. Additionally, the high cost of reticles and the large number of process layers make it quite important to catch these costly errors. Optical Rule Checking (ORC) is an effective way to predict failure on wafer shapes. Used in addition to Optical Proximity Correction, it can help to reduce failures affecting yield in manufacturing. Thus, due to the inter-layer complexity of processes and RET, the necessity to check accurately particular areas which could generate costly errors is growing: Here are some examples: 1) Low metal-contact or metal-via overlaps, 2) Small poly extension past active area, 3) Low overlap between poly and contact layers, and 4) Dual exposure techniques for single layer patterning. The main difficulty in current implementation of multiple layer RET verification is the trade off between accuracy vs. runtime vs. fault coverage. In this paper we will demonstrate how based on this trade off we can enhance our final printed results by accurately targeting the most likely failure mechanism on multiple layer processes check in a production environment (90nm node product layout). Finally we will show how ORC in a multiple layer check is going to help detect faults and overlay sensitive areas so as to secure process weakness areas. We will compare several softwares where such a methodology is applied and attend to propose a post OPC verification strategy to obtain a more robust manufacturing process.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christophe Couderc, Jerome Belledent, Amandine Borjon, Yorick Trouiller, Frank Sundermann, Kevin Lucas, Jean-Christophe Urbani, Franck Foussadier, Yves Rody, Kyle Patterson, and Stanislas Baron "Dual layer patterning failures in complex RET processes using ORC tools and pre- or post-optical proximity correction strategy", Proc. SPIE 5853, Photomask and Next-Generation Lithography Mask Technology XII, (28 June 2005); https://doi.org/10.1117/12.617412
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
Back to Top