Development of a fringe sensor based on 3x3 fiber optic coupler for space interferometry

L. K. Cheng; R. Koops; A. Wielders; W. Ubachs

doi:10.1117/12.623730

Translator Disclaimer

23 May 2005 Development of a fringe sensor based on 3x3 fiber optic coupler for space interferometry

L. K. Cheng, R. Koops, A. Wielders, W. Ubachs

Author Affiliations +

Proceedings Volume 5855, 17th International Conference on Optical Fibre Sensors; (2005) https://doi.org/10.1117/12.623730
Event: 17th International Conference on Optical Fibre Sensors, 2005, Bruges, Belgium

Abstract

Large stellar telescope is indispensable for astronomy. Aperture synthesis is a well-known technique to simulate a large space telescope by an array of small telescopes. Condition for aperture synthesis is that the light of the telescopes have to be combined coherently. Therefore, an interferometric Fringe Sensor (FS) to detect and stabilize the Optical Path Difference (OPD) between light from the different telescopes is required. TNO TPD develops a Fringe Sensor based on a 3x3 Fiber Optic (FO) coupler. A breadboard demonstrator operating around 830 nm is built. A piezo stretcher and a translation stage is used to generate the OPD. High-speed sub-nm OPD measurement is demonstrated. The influence of the visibility V of the interferometric signal is also investigated. Even for V=0.2, an OPD modulation of 0.4 nm can still be detected.

Citation Download Citation

L. K. Cheng, R. Koops, A. Wielders, and W. Ubachs "Development of a fringe sensor based on 3x3 fiber optic coupler for space interferometry", Proc. SPIE 5855, 17th International Conference on Optical Fibre Sensors, (23 May 2005); https://doi.org/10.1117/12.623730

ACCESS THE FULL ARTICLE