Dedicated near-field microscopies for electronic materials and devices

Ludwig Josef Balk; Ronald Marcus Cramer; Ralf Heiderhoff; Jacob C. H. Phang; Oleg Sergeev; Anne-Katrin Tiedemann

doi:10.1117/12.621577

13 June 2005 Dedicated near-field microscopies for electronic materials and devices (Plenary Paper)

Ludwig Josef Balk, Ronald Marcus Cramer, Ralf Heiderhoff, Jacob C. H. Phang, Oleg Sergeev, Anne-Katrin Tiedemann

Author Affiliations +

Proceedings Volume 5856, Optical Measurement Systems for Industrial Inspection IV; (2005) https://doi.org/10.1117/12.621577
Event: Optical Metrology, 2005, Munich, Germany

Abstract

With the ongoing reduction of structures sizes within electronic devices inspection tools have to be used allowing a resolution of below 50nm. This is not only necessary for a mere topological evaluation of materials or devices under test, but even more important for the nanoscopic determination of material parameters and device properties. When using waves as probes for this purpose, near-field techniques are quite often the only means for overcoming limitations in spatial resolution as due to Rayleigh's criterion, independently of the nature of the wave type used. In this manner acoustic and thermal waves can be applied for very high resolution testing as well as the well known scanning near-field optical microscope. Moreover, such techniques are not limited to simple systems in which the probing wave and the resulting interaction product are of same nature, but more complicated systems may be suitable to gain the information needed. In this manner near-field optical microscopy can be used for optical induced current measurements as well as for nanoscopic cathodoluminescence experiments. To achieve a comprehensive information on the sample, results gained with one special technique can be compared with others, such as scanning thermal or acoustic microscopy. These allow determination of mechanical and thermal properties with appropriate spatial resolution to be compared with , for instance, optoelectronic structures. The necessary instrumentation is described for such experiments with emphasis on the scanning near-field optical microscope. Examples for the application of near-field microscopies will be given for silicon technology, compound semiconductors, and ferroelectric ceramics.

Citation Download Citation

Ludwig Josef Balk, Ronald Marcus Cramer, Ralf Heiderhoff, Jacob C. H. Phang, Oleg Sergeev, and Anne-Katrin Tiedemann "Dedicated near-field microscopies for electronic materials and devices (Plenary Paper)", Proc. SPIE 5856, Optical Measurement Systems for Industrial Inspection IV, (13 June 2005); https://doi.org/10.1117/12.621577

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE