13 June 2005 Possible application of hyperchromatic optical systems for metrology of surfaces
Author Affiliations +
Abstract
The problems of topography of surfaces are very important in various parts of science and engineering. Several approaches exist for surface figure and roughness measurement. The measurement methods can be divided into two distinct categories, contact and non-contact techniques. Our work describes a relatively simple method for topography measurements that uses special optical systems (hyperchromats) with a linear dependence of longitudinal chromatic aberration on the wavelength of light. The aim of this work is to show a possible application of hyperchromatic optical systems for topography of surfaces. The work describes a basic analysis of parameters of hyperchromats, i.e. optical systems with large longitudinal chromatic aberration that is in our case linearly dependent on the wavelength of light. On the basis of the performed analysis, it can be designed such optical systems (optical sensors) that permit to perform measurements of topography of surfaces, i.e. determine a figure or roughness of surfaces. The sensor uses polychromatic light and relatively simple experimental arrangement. The proposed measurement technique seems to be quite simple and cost effective with respect to other measurement methods.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiri Novak, Antonin Miks, "Possible application of hyperchromatic optical systems for metrology of surfaces", Proc. SPIE 5856, Optical Measurement Systems for Industrial Inspection IV, (13 June 2005); doi: 10.1117/12.612023; https://doi.org/10.1117/12.612023
PROCEEDINGS
9 PAGES


SHARE
KEYWORDS
Chromatic aberrations

Glasses

Lenses

Optical design

Lens design

Sensors

Imaging systems

RELATED CONTENT

The design of SWIR imaging lenses using plastic optics
Proceedings of SPIE (October 19 2012)
LED collimation using high-index glass
Proceedings of SPIE (September 21 2011)
Theory of chromatic sensor for topography measurements
Proceedings of SPIE (April 12 2007)
Designs of apochromats and superachromatic objectives
Proceedings of SPIE (September 21 1998)
Glass Selection In Optical Design
Proceedings of SPIE (July 26 1985)
Zoom lens design
Proceedings of SPIE (October 14 2005)

Back to Top