Paper
18 August 2005 Analysis of thermal sources in a magnetorheological finishing (MRF) process
Author Affiliations +
Abstract
Magnetorheological finishing (MRF) is a computer controlled polishing (CCP) technique for high quality surfaces. The process uses a magnetorheological fluid which stiffens in a magnetic field and thus acts as the polishing tool. At the University of Applied Sciences Deggendorf thermal sources in a MRF polishing unit have been analysed using an infrared camera. The result of the research is a warming of the fluid in the fluid conditioner caused by the mixer motor. The existing cooling is therefore essential, in order to ensure a constant polishing tool characteristic during polishing runs. A new fluid conditioner, which was developed at the University of Applied Sciences Deggendorf, with the aim of an extended fluid lifetime may be used without cooling, because an increase of the fluid temperature in the conditioner could not been detected. Furthermore, a warming of the workpiece during the polishing process was not ascertainable.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andreas Geiss, Markus Schinhaerl, Elmar Pitschke, Rolf Rascher, and Peter Sperber "Analysis of thermal sources in a magnetorheological finishing (MRF) process", Proc. SPIE 5869, Optical Manufacturing and Testing VI, 58690J (18 August 2005); https://doi.org/10.1117/12.616751
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polishing

Magnetorheological finishing

Applied sciences

Infrared radiation

Surface finishing

Temperature metrology

Photovoltaics

Back to Top