30 August 2005 Polarization in optical coatings
Author Affiliations +
Proceedings Volume 5875, Novel Optical Systems Design and Optimization VIII; 587504 (2005); doi: 10.1117/12.613934
Event: Optics and Photonics 2005, 2005, San Diego, California, United States
Abstract
Optical coatings are stratified media and, therefore, strongly anisotropic. The principal purpose of the stratification is to induce interference so as to yield the required spectral characteristics. At normal incidence the properties are largely insensitive to polarization, but at oblique incidence the sensitivity is significant. There may also be some birefringence in the material of the layers themselves, due to anisotropic strain or a directional microstructure, but, unless deliberately enhanced, their influence is normally small compared with that of the stratification. The effects are completely predictable and unambiguous, but, especially when coated components are combined into systems, they can be complicated and often unexpected. We normally divide optical coating materials into two major groups, metals and dielectrics. (Semiconductors are lumped with dielectrics.) These material classes behave differently. It is sometimes said that metals are insensitive to polarization. This is an oversimplification. Further, the surrounding media are usually dielectric, and so a coating incorporating a metal layer does exhibit a sensitivity to polarization, but of a somewhat different nature from that of a purely dielectric system. The polarization properties can be understood in terms of two linearly polarized eigenmodes defined in relation to the plane of incidence and designated as p- and s-polarization. Unfortunately, as is common in optics, there are several sign conventions, not always clearly defined when results are quoted.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Angus Macleod, "Polarization in optical coatings", Proc. SPIE 5875, Novel Optical Systems Design and Optimization VIII, 587504 (30 August 2005); doi: 10.1117/12.613934; https://doi.org/10.1117/12.613934
PROCEEDINGS
14 PAGES


SHARE
KEYWORDS
Coating

Dielectric polarization

Reflectivity

Dielectrics

Reflection

Metals

Optical coatings

RELATED CONTENT

Genetic algorithm and thin-film design
Proceedings of SPIE (September 07 1994)
FiberlaseTM: a monolithic hollow waveguide
Proceedings of SPIE (July 28 1994)
Optical thin film coating design
Proceedings of SPIE (August 19 1996)

Back to Top