30 August 2005 Investigating the ArF laser stability of CaF2 at elevated fluences
Author Affiliations +
Abstract
Combined measurements of transmission T, absorption A and total scattering TS revealed the high accuracy of all applied measurement techniques by obtaining a sum T+A+TS+R = (100±0.3)% (R denotes the Fresnel reflection). In order to investigate CaF2 at high fluences, a variety of samples from high purity excimer grade to research grade was irradiated (80 ... 150 mJ/cm2, 2*106...7*106 pulses) and characterized before and after irradiation by total scattering, laser induced fluorescence (LIF) and transmission measurements. Total scattering mappings showed negligible and measurable scattering in excimer grade and some research samples of minor purity, respectively. For the first time to our knowledge, laser induced fluorescence measurements revealed increasing (580nm, 740 nm) as well as decreasing (313 nm, 333 nm) emissions. The small increases of the linear absorption, obtained in all samples by transmission measurements, were used to distinguish high from minor quality material. For high quality samples the linear absorption change scales with NH3 (N: number of pulses), whereas for minor quality research samples a NH2-scaling was found.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Burkert, Ch. Muehlig, W. Triebel, D. Keutel, U. Natura, L. Parthier, S. Gliech, S. Schroeder, A. Duparre, "Investigating the ArF laser stability of CaF2 at elevated fluences", Proc. SPIE 5878, Advanced Characterization Techniques for Optics, Semiconductors, and Nanotechnologies II, 58780E (30 August 2005); doi: 10.1117/12.616904; https://doi.org/10.1117/12.616904
PROCEEDINGS
8 PAGES


SHARE
Back to Top