Laboratory and field experimental demonstration of a Fourier telescopy imaging system

E. Louis Cuellar; James Stapp; Justin Cooper

doi:10.1117/12.615444

23 August 2005 Laboratory and field experimental demonstration of a Fourier telescopy imaging system

E. Louis Cuellar, James Stapp, Justin Cooper

Proceedings Volume 5896, Unconventional Imaging; 58960D (2005) https://doi.org/10.1117/12.615444
Event: Optics and Photonics 2005, 2005, San Diego, California, United States

Abstract

Fourier telescopy (FT) is an active imaging technique that is a good candidate for high resolution imaging systems that can be used to obtain satellite images out to geosynchronous target ranges. Fourier telescopy uses multiple beams that illuminate the target with a fringe pattern that sweeps across it due to frequency differences between beams. In this way the target spatial frequency components are encoded in the temporal signal that is reflected from the target. The FT receiver can then be composed of a large area "light bucket" collector, since only the integrated temporal signal is necessary to reconstruct the target image. The GEO Light Imaging National Testbed (GLINT) system was previously designed to obtain satellite images at geosynchronous ranges by using this technique. Laboratory experiments by several groups have demonstrated the validity of this technique to produce images from simulated targets. In this paper we expand upon these previous experiments to present results from both a FT laboratory and field experimental setup that simulated realistic photon noise, speckle noise, and atmospheric turbulence that will be encountered in an actual FT imaging system. To obtain the scaling for the FT experiment, we have used the GLINT system design parameters for our experimental setup. We will also discuss the phase closure process used to eliminate the random phase differences between the beams from the target spatial frequency measurements and the basic reconstruction algorithm used to produce the target image. Results will also be given that demonstrate the phase closure variance is reduced by averaging a small number of high SNR measurements together, as compared to averaging a larger number of low SNR measurements. Target reconstruction improvements obtained by "unbiasing" the average of the individual low SNR phase closure measurements will also be discussed.

Citation Download Citation

E. Louis Cuellar, James Stapp, and Justin Cooper "Laboratory and field experimental demonstration of a Fourier telescopy imaging system", Proc. SPIE 5896, Unconventional Imaging, 58960D (23 August 2005); https://doi.org/10.1117/12.615444

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available