22 September 2005 Calibration of the New Horizons Long-Range Reconnaissance Imager
Author Affiliations +
Abstract
The LOng-Range Reconnaissance Imager (LORRI) is a panchromatic imager for the New Horizons Pluto/Kuiper belt mission. New Horizons is being prepared for launch in January 2006 as the inaugural mission in NASA's New Frontiers program. This paper discusses the calibration and characterization of LORRI. LORRI consists of a Ritchey-Chretien telescope and CCD detector. It provides a narrow field of view (0.29°), high resolution (pixel FOV = 5 μrad) image at f/12.6 with a 20.8~cm diameter primary mirror. The image is acquired with a 1024 x 1024 pixel CCD detector (model CCD 47-20 from E2V). LORRI was calibrated in vacuum at three temperatures covering the extremes of its operating range (-100°C to +40°C for various parts of the system) and its predicted nominal temperature in-flight. A high pressure xenon arc lamp, selected for its solar-like spectrum, provided the light source for the calibration. The lamp was fiber-optically coupled into the vacuum chamber and monitored by a calibrated photodiode. Neutral density and bandpass filters controlled source intensity and provided measurements of the wavelength dependence of LORRI's performance. This paper will describe the calibration facility and design, as well as summarize the results on point spread function, flat field, radiometric response, detector noise, and focus stability over the operating temperature range. LORRI was designed and fabricated by a combined effort of The Johns Hopkins University Applied Physics Laboratory (APL) and SSG Precision Optronics. Calibration was conducted at the Diffraction Grating Evaluation Facility at NASA/Goddard Space Flight Center with additional characterization measurements at APL.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Morgan, F. Morgan, S. J. Conard, S. J. Conard, H. A. Weaver, H. A. Weaver, O. Barnouin-Jha, O. Barnouin-Jha, A. F. Cheng, A. F. Cheng, H. W. Taylor, H. W. Taylor, K. A Cooper, K. A Cooper, R. H. Barkhouser, R. H. Barkhouser, R. Boucarut, R. Boucarut, E. H. Darlington, E. H. Darlington, M. P. Grey, M. P. Grey, I. Kuznetsov, I. Kuznetsov, T. J. Madison, T. J. Madison, M. A. Quijada, M. A. Quijada, D. J. Sahnow, D. J. Sahnow, J. M. Stock, J. M. Stock, } "Calibration of the New Horizons Long-Range Reconnaissance Imager", Proc. SPIE 5906, Astrobiology and Planetary Missions, 59061E (22 September 2005); doi: 10.1117/12.616880; https://doi.org/10.1117/12.616880
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

The WIYN one degree imager 2014 performance of the...
Proceedings of SPIE (July 07 2014)
RHESSI aspect system and in-flight calibration
Proceedings of SPIE (February 10 2003)
Design and performance of the EO-1 Advanced Land Imager
Proceedings of SPIE (December 27 1999)
Spatial calibration of the EO-1 Advanced Land Imager
Proceedings of SPIE (September 23 1999)
ASTER on-board calibration status
Proceedings of SPIE (October 08 2008)
An optical shutter for the Euclid imager
Proceedings of SPIE (July 22 2010)

Back to Top