Paper
22 September 2005 Preparation of light-emitting organic field-effect transistors with asymmetric electrodes
Tomo Sakanoue, Ryo Yamada, Hirokazu Tada
Author Affiliations +
Abstract
Light-emitting organic field-effect transistors (LEOFETs) based on Poly [2-methoxy, 5-(2'-ethyl-hexoxy)-1, 4-phenylenevinylene] (MEH-PPV), α-sexithiophene (α-6T) and N,N'-Ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13) were prepared on a SiO2 gate insulator. The LEOFETs based on MEH-PPV and α-6T showed a p-type semiconducting behavior whereas PTCDI-C13 operated in n-type FET. Asymmetric electrodes of Au-Al were prepared by twice of photolithography and lift-off techniques, and by electroplating of Au onto Al electrode to improved device performances. The emission efficiency of the devices with Au/Cr-Al was approximately 20 times higher than that of the device with Au/Al-Au/Al electrodes at the gate and drain voltages of -100 V. The emission region was observed with an optical microscope. The emission region was found to be very homogeneous along the drain electrode, and it did not shift when the gate and drain voltages changed. Although the carrier injection was improved by using asymmetric electrodes, the number of the carriers injected from the drain electrode was still lower than that from the source electrode in the unipolar devices.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tomo Sakanoue, Ryo Yamada, and Hirokazu Tada "Preparation of light-emitting organic field-effect transistors with asymmetric electrodes", Proc. SPIE 5940, Organic Field-Effect Transistors IV, 59400Y (22 September 2005); https://doi.org/10.1117/12.618020
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Field effect transistors

Gold

Aluminum

Transistors

Semiconductors

N-type semiconductors

Back to Top