14 September 2005 The heat dissipation performance of LED applied a MHP
Author Affiliations +
Abstract
This study will discuss the heat dissipation effect of light emitting diode (LED) device applied a commercial miniature heat pipe (MHP). For lowering the thermal resistance of LED, the MHP can reduce the working temperature and raise the allowable input power of LED chip obviously. By comparing with a copper rod, the LED temperature was decreased about 19% at 1.59W input power and the LED power was increased about 43% under 118°C chip temperature. On the other hand, the thermal resistance of LED also can be reduced by using a thinner slug. Moreover, the results showed that the thermal spreading effect was significant. The MHP could be used to avoid the hot spot of LED packaging due to its excellent heat spreading property. Simultaneously, a LED thermal simulation was carried out to verify the optimum value of slug thickness.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gwo-Jiun Sheu, Gwo-Jiun Sheu, Farn-Shiun Hwu, Farn-Shiun Hwu, Shen-Hang Tu, Shen-Hang Tu, Wen-Tung Chen, Wen-Tung Chen, Jenq-Yang Chang, Jenq-Yang Chang, Jyh-Chen Chen, Jyh-Chen Chen, } "The heat dissipation performance of LED applied a MHP", Proc. SPIE 5941, Fifth International Conference on Solid State Lighting, 594113 (14 September 2005); doi: 10.1117/12.616355; https://doi.org/10.1117/12.616355
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

White LED performance
Proceedings of SPIE (October 19 2004)
Study on the heat dissipation of high-power LEDs
Proceedings of SPIE (November 15 2010)
Thermal analysis of multichip LED packages
Proceedings of SPIE (September 20 2006)
Thermal analysis of wafer-level LED packages with multichips
Proceedings of SPIE (September 25 2007)
Thermal design of high-power LED package and system
Proceedings of SPIE (September 20 2006)

Back to Top