6 December 2006 An examination of industrial objects with the VolumeScope
Author Affiliations +
Proceedings Volume 5943, X-ray and Neutron Capillary Optics II; 59430H (2006); doi: 10.1117/12.637915
Event: X-ray and Neutron Capillary Optics II, 2004, Zvenigorod, Russian Federation
Abstract
An X-ray equipment with a Kumakhov lens for scanning industrial objects on the base of Compton backscatter is presented. The device was equipped with X-ray tube BSV-25 with linear tungsten anode and focal spot size 0.07 x 2.0 mm2. The tube voltage and power was 60 kV and 270 W respectively. The focal spot of the lens was 0.08 mm in diameter and the lens transmission was 8.6% at the photon energy 30 keV. Obtained images of various technical objects are presented. The minimum scanning step and the spatial resolution of the images were equal to 0.01 mm and 0.05 mm respectively.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anatoly F. Gamaliy, Michael Yu. Zaytsev, "An examination of industrial objects with the VolumeScope", Proc. SPIE 5943, X-ray and Neutron Capillary Optics II, 59430H (6 December 2006); doi: 10.1117/12.637915; https://doi.org/10.1117/12.637915
PROCEEDINGS
4 PAGES


SHARE
KEYWORDS
X-rays

X-ray detectors

Spatial resolution

Scattering

Sensors

Tungsten

Backscatter

RELATED CONTENT

Design and development of grazing incidence x-ray mirrors
Proceedings of SPIE (January 26 2016)
The use of Kumakhov lenses in diagnostics of osteoporosis
Proceedings of SPIE (December 06 2006)
Rapid detection of surface defects by x-ray scanning
Proceedings of SPIE (September 26 2000)
Response of a CsI amorphous Si flat panel detector as...
Proceedings of SPIE (March 02 2006)
X-ray cone beam CT system calibration
Proceedings of SPIE (December 16 1993)
X ray scanner a new device for rapid visualization...
Proceedings of SPIE (July 29 2002)

Back to Top