13 June 2006 Hybrid solar cells based on inorganic thin film structures and conjugated polymers
Author Affiliations +
Proceedings Volume 5946, Optical Materials and Applications; 59460V (2006) https://doi.org/10.1117/12.639059
Event: Optical Materials and Applications, 2005, Tartu, Estonia
Abstract
Hybrid solar cells based on a combination of conductive polymer poly (3,4-ethylenedioxyth1ophene) (PEDOT) doped with polystyrenesulfonate (PSS) and inorganic semiconductor CuIn(S,Se)2 (CISSe) were investigated. The CuInSe2 (CISe) absorber layers were electrodeposited on IT0 covered glasses from aqueous solutions with various ratios of elements. The ITO/In(O,S)/CISSe photovoltaic (PV) junctions were prepared by the sulfurization of ITO/CISe precursors at 450 °C in the H2S atmosphere. A PEDOT-PSS layer of p-type is considered as an alternative for the traditional window top layer on the CISSe absorber layer in the cell structure. The polymer deposition was performed using spin-casting technique. The PV properties of the prepared ITO/In(O,S)/CISSe and ITO/In(O,S)/CISSe/PEDOT- PSS structures were investigated, with special attention paid to the role of the conductive polymer layer in the cell structure.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Julia Kois, Julia Kois, Sergei Bereznev, Sergei Bereznev, Jaan Raudoja, Jaan Raudoja, Enn Mellikov, Enn Mellikov, Andres Öpik, Andres Öpik, } "Hybrid solar cells based on inorganic thin film structures and conjugated polymers", Proc. SPIE 5946, Optical Materials and Applications, 59460V (13 June 2006); doi: 10.1117/12.639059; https://doi.org/10.1117/12.639059
PROCEEDINGS
6 PAGES


SHARE
Back to Top