6 October 2005 Integration of monitoring layer in control measurement system for VUV-FEL
Author Affiliations +
Abstract
The work presents an 8-channel control system for a superconducting cavity accelerating module ACC1 of the VUVFEL machine. The integration was described of a monitoring layer with the DSP control layer realized in the programmable Xilinx VirtexII V4000 circuit. The implementation was realized in the VHDL. The hardware multiplication blocks were used which are embedded in the FPGA circuit. The final implementation of the device was presented. The device works in the real time, according to the nominal demands of the VUV-FEL machine. The paper describes the monitoring layer. There were shortly characterized particular functional blocks of the layers implemented in the FPGA circuit. There was presented a computer process of system supervision which uses the monitoring layer. Some chosen examples were presented to illustrate the real-time monitoring processes during the nominal work conditions of the VUV-FEL machine.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Krzysztof Pozniak, Krzysztof Pozniak, } "Integration of monitoring layer in control measurement system for VUV-FEL", Proc. SPIE 5948, Photonics Applications in Industry and Research IV, 594820 (6 October 2005); doi: 10.1117/12.620164; https://doi.org/10.1117/12.620164
PROCEEDINGS
7 PAGES


SHARE
Back to Top