Paper
14 October 2005 Design of a Tessar lens including a diffractive optical element
Author Affiliations +
Abstract
To study the quantitative impact of diffractive optical elements on lens design and glass selection, a Zeiss Tessar lens (f/6) with and without a diffractive optical element is optimized with respect to the wavefront performance by a Zemax(R) Hammer routine. Optimization includes the selection of glasses as well as the geometry of the optical elements. In a first run, these are all refractive elements. In a second run, one refractive element is replaced with one diffractive surface. In a third run, the diffractive surface is introduced as an additional feature. It is found that one refractive element can be replaced with a diffractive surface at a moderate loss of lens performance. This holds, however, only for an optimized glass selection, which is found to be particularly important. In the case of four refractive elements plus diffractive surface, an according result is obtained. The diffractive surface will improve the overall system performance if and only if the glass selection is appropriate.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Fotheringham, Wolfgang Pannhorst, Robert E. Fischer, and Alastair Grant "Design of a Tessar lens including a diffractive optical element", Proc. SPIE 5962, Optical Design and Engineering II, 59621D (14 October 2005); https://doi.org/10.1117/12.631182
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Modulation transfer functions

Diffraction

Crown glass

Diffractive optical elements

Lanthanum

Flint glass

RELATED CONTENT


Back to Top