Paper
7 February 2006 Effects of scratch speed on laser-induced damage
Author Affiliations +
Abstract
A major issue in high power lasers for fusion is laser-induced damage on optical components. Since damage is often initiated by a surface crack resulting from polishing, it is important to understand the physics involved in this phenomenon. In this study, calibrated surface scratches have been realized on two silica samples using an indenter-scratcher apparatus. A variety of scratches have been tested by applying different speeds and forces on the scratcher needle. Optical microscope observations show that the scratches made at highest speed create irregular dashed lines. In addition, we have observed, at intermediate speed, an evolution in time of the scratches due to local stresses in silica. One of the samples was irradiated by a Nd:YAG laser beam at 355 nm with the scratches on the exit surface. Microscope observations were made before and after irradiation. Strong dependence on the scratch speed was observed on the local laser damage. Again, temporal evolution of the damage has been observed.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Josse, J.L. Rullier, R. Courchinoux, T. Donval, L. Lamaignère, and H. Bercegol "Effects of scratch speed on laser-induced damage", Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005, 599106 (7 February 2006); https://doi.org/10.1117/12.638762
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser induced damage

Silica

Laser irradiation

Microscopes

Optical components

Surface finishing

Optical microscopes

Back to Top