25 October 2005 40 Gbit/s upgrades on existing 10 Gbit/s transport infrastructure
Author Affiliations +
Increasing the data rates by a factor of four has historically reduced the cost for the transmission of a unit bandwidth by approximately 40%. As the next natural increase in data rate, 40 Gb/s has been the focus of extensively investigation in research and development labs around the world for several years. However, despite the obvious potentials, 40 Gb/s systems have not yet been commercially deployed, in part because 40 Gb/s is associated with a number of misconceptions, e.g., that 40 Gb/s technology is not mature and that the transmission distance is severely limited by fiber dispersion. In this paper we address the practical requirements that 40 Gb/s systems must meet to become commercially deployed. We show that seamless migration of a 10 Gb/s system to 40 Gb/s per channel is possible with correctly designed line cards. Moreover, we discuss the technologies needed to implement different modulation formats, and the corresponding trade-off between complexity/cost of line cards and the achievable fiber transmission distance.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Martin Birk, Martin Birk, Benny Mikkelsen, Benny Mikkelsen, } "40 Gbit/s upgrades on existing 10 Gbit/s transport infrastructure", Proc. SPIE 6012, Optical Transmission Systems and Equipment for WDM Networking IV, 60120D (25 October 2005); doi: 10.1117/12.638190; https://doi.org/10.1117/12.638190


Back to Top