25 October 2005 5.3 W cw output power from a master oscillator power amplifier at 1083nm
Author Affiliations +
Abstract
A master-oscillator power-amplifier system at λ=1083 nm with 5.3 Watt output power and a narrow spectral linewidth was realised. The master oscillator was a distributed Bragg reflector (DBR) laser with a 3-μm wide ridge waveguide (RW) and a total length of 2 mm. The power amplifiers were a 4 mm long antireflection coated tapered laser diodes with 500 μm or 1000 μm long straight RW sections. At a temperature of 40oC and an injection current of 160 mA, the DBR laser had a wavelength of 1083 nm. The emitted light of the DBR laser was focused into the tapered amplifier with a seed power of up to 36 mW. At 10oC and at a current through the tapered amplifier of 8.6 A, a maximum output power of 5.3 W was measured. Over the full operating range single longitudinal mode operation at a wavelength of λ=1083 nm was maintained with a side mode suppression ratio better than 35 dB. The vertical far field angle was below 22o (FWHM).
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernd Sumpf, Bernd Sumpf, Sven Schwertfeger, Sven Schwertfeger, Jörg Wiedmann, Jörg Wiedmann, Andreas Klehr, Andreas Klehr, Frank Dittmar, Frank Dittmar, Götz Erbert, Götz Erbert, Günther Tränkle, Günther Tränkle, } "5.3 W cw output power from a master oscillator power amplifier at 1083nm", Proc. SPIE 6013, Optoelectronic Devices: Physics, Fabrication, and Application II, 60130C (25 October 2005); doi: 10.1117/12.630640; https://doi.org/10.1117/12.630640
PROCEEDINGS
12 PAGES


SHARE
Back to Top