Paper
2 December 2005 Effective methods for the fabrication of multi-wavelength FBG by using a single phase mask
Author Affiliations +
Proceedings Volume 6019, Passive Components and Fiber-based Devices II; 60192O (2005) https://doi.org/10.1117/12.634164
Event: Asia-Pacific Optical Communications, 2005, Shanghai, China
Abstract
The successful fabrication of multi-wavelength FBG by using the high precision exposure clamp of scanning stage that made by ourselves are introduced. Only a single phase mask is used, and the wavelengths of FBGs fit the wavelength standard of the ITU-T. FBGs with four different wavelengths are fabricated by using one phase mask, and they have been used in a 4×10Gb/s, 1000 km conventional single mode optical fiber(G.652) transmission system. In each channel, 6 FBGs are used for the dispersion compensation and the power penalty in each channel is less than 1.8dB.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pei Li, Tigang Ning, Xiaowei Dong, Lei Wang, Bin Yang, and Shuisheng Jian "Effective methods for the fabrication of multi-wavelength FBG by using a single phase mask", Proc. SPIE 6019, Passive Components and Fiber-based Devices II, 60192O (2 December 2005); https://doi.org/10.1117/12.634164
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Refractive index

Optical fibers

Modulation

Ultraviolet radiation

Wavelength division multiplexing

Reflectivity

Back to Top