You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
2 December 2005Effective methods for the fabrication of multi-wavelength FBG by using a single phase mask
The successful fabrication of multi-wavelength FBG by using the high precision exposure clamp of scanning stage that made by ourselves are introduced. Only a single phase mask is used, and the wavelengths of FBGs fit the wavelength standard of the ITU-T. FBGs with four different wavelengths are fabricated by using one phase mask, and they have been used in a 4×10Gb/s, 1000 km conventional single mode optical fiber(G.652) transmission system. In each channel, 6 FBGs are used for the dispersion compensation and the power penalty in each channel is less than 1.8dB.
The alert did not successfully save. Please try again later.
Pei Li, Tigang Ning, Xiaowei Dong, Lei Wang, Bin Yang, Shuisheng Jian, "Effective methods for the fabrication of multiwavelength FBG by using a single phase mask," Proc. SPIE 6019, Passive Components and Fiber-based Devices II, 60192O (2 December 2005); https://doi.org/10.1117/12.634164