9 December 2005 Optoelectronic non-contact measuring method for the taper of a bore
Author Affiliations +
Proceedings Volume 6024, ICO20: Optical Devices and Instruments; 60241D (2005) https://doi.org/10.1117/12.666858
Event: ICO20:Optical Devices and Instruments, 2005, Changchun, China
Based on laser optical triangulation displacement and grating displacement inspecting principle, optoelectronic non-contact inspecting method and inspecting system for the taper of small-calibre bore are presented. In this paper, the constitute and overall structure of the system are described. Then, the taper inspecting method and principle of the bore are discussed and theoretically analyzed, and also, the corresponding mathematics model is established. As inner diameter measurement is an important parameter for the taper of small-bore, an inner diameter laser non-contact measuring method is presented based on the structure characteristic of the taper of small-calibre bore, which adopted optoelectronic probe sensitive device (PSD) and laser optical triangulation inspecting principle. And then, the laser probe inner diameter measuring system is designed based them. Moreover, the measuring principle, the project of optical system of this measuring system are illuminated in detail in this article. The accuracy of inspecting system is verified by experiment. The results showed that the measuring error of inspecting system is superior to ±0.005, and the inspecting repetition is superior to ±0.003. It indicates that the system can fulfill the inspecting accuracy demand for inspecting the taper of the small-calibre bore, and the inspecting method is applicable.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liancun Zhang, Qingyuan Tian, Xun Zhou, Libao Yang, Yang Fang, Guoyu Zhang, Xiping Xu, "Optoelectronic non-contact measuring method for the taper of a bore", Proc. SPIE 6024, ICO20: Optical Devices and Instruments, 60241D (9 December 2005); doi: 10.1117/12.666858; https://doi.org/10.1117/12.666858


Quality Control By Diffraction Pattern Analysis
Proceedings of SPIE (October 20 1975)
A Computer-Controlled Laser Bore Scanner
Proceedings of SPIE (August 08 1980)
Research state-of-the-art of mobile robots in China
Proceedings of SPIE (March 01 1991)
Intelligent pump test system based on virtual instrument
Proceedings of SPIE (September 02 2003)

Back to Top