20 January 2006 Numerical analysis of compound aspheric lens design and fabrication
Author Affiliations +
Proceedings Volume 6027, ICO20: Optical Information Processing; 60273Q (2006) https://doi.org/10.1117/12.668341
Event: ICO20:Optical Devices and Instruments, 2005, Changchun, China
This paper discussed the scheme of modeling compound aspheric components during the optimization process. First, the method to model the refractive index and thickness changes of the resin layer induced in the injection-mold process is described. It demonstrated the available constraints upon the refractive index difference between the resin and the glass during the optimization run. The tolerance aspects of such components are then investigated, including the refractive index and thickness of the resin layer, as well as the conventional surface roughness, element position and rotation errors, and surface slope errors; especially for the centering tolerance. It is shown that the approximate model might be useful for different combinations with UV-curable resins and glasses for aspheric lens design and fabrication. An objective for optical pickup system comprising one compound aspheric surface is designed with the scheme.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xuemin Cheng, Xuemin Cheng, Duanyi Xu, Duanyi Xu, Qun Hao, Qun Hao, } "Numerical analysis of compound aspheric lens design and fabrication", Proc. SPIE 6027, ICO20: Optical Information Processing, 60273Q (20 January 2006); doi: 10.1117/12.668341; https://doi.org/10.1117/12.668341


The Lens Designer-An Endangered Species
Proceedings of SPIE (February 28 1974)
Design challenges for the 1990s
Proceedings of SPIE (December 31 1990)

Back to Top