7 February 2006 Process simulation of Kovar-glass-silicon bonding for micromachined combustor
Author Affiliations +
Proceedings Volume 6032, ICO20: MEMS, MOEMS, and NEMS; 60320C (2006) https://doi.org/10.1117/12.667859
Event: ICO20:Optical Devices and Instruments, 2005, Changchun, China
Abstract
High-temperature and high-pressure connection between micro combustor and macro world for feeding of air/fuel gas is required in PowerMEMS development. A Kovar tubing-Glass-Si sealing process has been developed for an on-going PowerMEMS project to connect Kovar tubes with diameters of 2mm and 4mm, to top Si wafer of micro combustor fabricated by DRIE process. Due to the different CTEs (coefficients of thermal expansion) of the connected materials, thermal stress around the sealing area could probably influence the obturation and other properties of the sealed combustor. A numeric simulation on sealing of the structure was conducted on ANSYS software to investigate this kind of sealing process. The thermal stress and displacement from room temperature to combustion circumstance, and to sealing condition as high as 1220K were simulated. The size affection of glass bonder and the metal tubes was investigated. A process of high temperature sealing Kovar-glass-silicon was developed and a prototype of the packaged micro combustor was manufactured.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Zhao, Ying Zhao, Min Miao, Min Miao, Yufeng Jin, Yufeng Jin, Xue Chuan Shan, Xue Chuan Shan, Chee Khuen Wong, Chee Khuen Wong, } "Process simulation of Kovar-glass-silicon bonding for micromachined combustor", Proc. SPIE 6032, ICO20: MEMS, MOEMS, and NEMS, 60320C (7 February 2006); doi: 10.1117/12.667859; https://doi.org/10.1117/12.667859
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Silicon on insulator inertial MEMS device processing
Proceedings of SPIE (January 22 2006)
Vacuum wafer-level packaging for MEMS applications
Proceedings of SPIE (January 14 2003)
Micromachined multifiber optic splices
Proceedings of SPIE (May 21 1995)

Back to Top