Thermal modeling of a microheater in a microchannel chip

Y. Zhu; A. Bui; H. Jin; S. Nahavandi; E. C. Harvey; I. D. Sutalo

doi:10.1117/12.660972

19 January 2006 Thermal modeling of a microheater in a microchannel chip

Y. Zhu, A. Bui, H. Jin, S. Nahavandi, E. C. Harvey, I. D. Sutalo

Proceedings Volume 6036, BioMEMS and Nanotechnology II; 60361Y (2006) https://doi.org/10.1117/12.660972
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia

Abstract

Integration of microheaters in microfluidic systems has a wide range of applications such as sensing, actuating and biomedical devices. This study focused on the investigation of the thermal performance of a nickel microheater fabricated on a printed circuit board using a LIGA process. Both experimental and computational methods were used in conjunction with preliminary theoretical analysis. The microheater was tested both in air and water. The temperature distributions of the microheater were measured by an advanced thermography system. The numerical study was carried out using the multiphysics CFD package CFD-Ace+. The temperature of the microheater increased approximately linearly with the input power for the experimental conditions. The microheater heated up exponentially at the start of power supply. At a supply of 120mA electrical current, the microheater could heat up at a rate of around 90°C/s. During the cooling stage, the rate was much higher and could reach 800°C/s. When placed in the microchannel with air flow, the heater could heat the flow effectively without causing significant increase in the chip temperature. The CFD results were validated by comparing temperature distributions on the chip surface and on the heater surface. The validated CFD results allowed more detailed investigations of thermal and fluid flow within the microchannel and the whole chip.

Citation Download Citation

Y. Zhu, A. Bui, H. Jin, S. Nahavandi, E. C. Harvey, and I. D. Sutalo "Thermal modeling of a microheater in a microchannel chip", Proc. SPIE 6036, BioMEMS and Nanotechnology II, 60361Y (19 January 2006); https://doi.org/10.1117/12.660972

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available