20 February 2006 Development of intelligent instrument for material's sound frequency damping measurement
Author Affiliations +
Proceedings Volume 6041, ICMIT 2005: Information Systems and Signal Processing; 60411L (2006) https://doi.org/10.1117/12.664340
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
In order to replace complex and expensive equipment for measurements of damping, an intelligent instrument was developed using a cantilever beam with computer control and analysis. Both an acceleration transducer and an eddy transducer were installed in this instrument. This allowed one of them to be selected when measuring material damping properties using samples either in regular or irregular shapes. Damping properties of several materials, such as magnesium alloys and aluminum alloys, were measured using this instrument in order to validate its veracity and reliability. The data obtained were found to agree well with those obtained from other raditional equipment applying the turning and swing method, which requires strict control of the shape and size of the sample. The results show that this miniature material damping measurement instrument avoids the deficiency of traditional equipment, and therefore should be very useful for engineering damping measurements that occur in unattenuated forced vibrations.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jin Zhang, Jin Zhang, Zhifu Sun, Zhifu Sun, Dongya Wang, Dongya Wang, Ying Wang, Ying Wang, Chaoyun Wu, Chaoyun Wu, } "Development of intelligent instrument for material's sound frequency damping measurement", Proc. SPIE 6041, ICMIT 2005: Information Systems and Signal Processing, 60411L (20 February 2006); doi: 10.1117/12.664340; https://doi.org/10.1117/12.664340
PROCEEDINGS
6 PAGES


SHARE
Back to Top