Translator Disclaimer
2 May 2006 Fuzzy control of an automotive while braking
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60420C (2006) https://doi.org/10.1117/12.664526
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
To investigate the dynamic characteristics of an automotive and develop a control method for its safe braking, a dynamic model of the car with active suspension devices during its braking was established. The dynamic model was with 4 degrees of freedom, that is, two degrees of freedom with the car body and others with forefront wheels and rear wheels. For the purpose of reliable use of the control method in most cases, a wavy road was included in the problem. Considering random road surface, braking deceleration and traveling speed of the car when braking, a fuzzy control method was used. Based on a real car made in China, computer simulation was adopted to investigate the dynamic characteristics of the car and the fuzzy control method. The results show that under the condition of an elaborately developed fuzzy control method used in the 4 active suspension devices, the displacement of the mass center and the turnover angle of the car body are greatly reduced and about only one half of their original values are remained.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shirong Yan "Fuzzy control of an automotive while braking", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60420C (2 May 2006); https://doi.org/10.1117/12.664526
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
Back to Top