Fault self-diagnosis designing method of the automotive electronic control system

Yangyan Ding; Zhigang Yang; Xiaolin Fu

doi:10.1117/12.664633

2 May 2006 Fault self-diagnosis designing method of the automotive electronic control system

Yangyan Ding, Zhigang Yang, Xiaolin Fu

Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60421V (2006) https://doi.org/10.1117/12.664633
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China

Abstract

The fault self-diagnosis system is an important component of an the automotive electronic control system. Designers of automotive electronic control systems urgently require or need a complete understanding of the self-diagnosis designing method of the control system in order to apply it in practice. Aiming at this exigent need, self-diagnosis methods of designing sensors, electronic control unit (ECU), and actuators, which are the three main parts of automotive electronic control systems, are discussed in this paper. According to the fault types and characteristics of commonly used sensors, self-diagnosis designing methods of the sensors are discussed. Then fault diagnosis techniques of sensors utilizing signal detection and analytical redundancy are analysed and summarized respectively, from the viewpoint of the self-diagnosis designing method. Also, problems about failure self-diagnosis of ECU are analyzed here. For different fault types of an ECU, setting up a circuit monitoring method and a self-detection method of the hardware circuit are adopted respectively. Using these two methods mentioned above, a real-time and on-line technique of failure self-diagnosis is presented. Furthermore, the failure self-diagnosis design method of ECU are summarized. Finally, common faults of actuators are analyzed and the general design method of the failure self-diagnosis system is presented. It is suggested that self-diagnosis design methods relative to the failure of automotive electronic control systems can offer a useful approach to designers of control systems.

Citation Download Citation

Yangyan Ding, Zhigang Yang, and Xiaolin Fu "Fault self-diagnosis designing method of the automotive electronic control system", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60421V (2 May 2006); https://doi.org/10.1117/12.664633

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available