2 May 2006 The verification of UAV's autopilot system with realtime HILS
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60422I (2006) https://doi.org/10.1117/12.664661
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
Unmanned aerial vehicle (UAV) was designed to fulfill its mission autonomously. Its core technology for successful development of the UAV is to design of the flight control system (FCS) consisting of the flight control computer, the actuator, the sensor in order to replace the pilot. Each development procedure of FCS involves a verifying test for each step and was completed by an evaluation test of the comprehensive performance verification for the overall systems. The development tool, which is applied to this objective, is the HILS (Hardware-In-the-Loop-Simulation). That is, HILS is a cost-effective method for testing complex, flight-critical hardware before it is used in the real world. The real-time HILS is shown to develop/verify the performance of SURV UAV's controller in the lateral/directional control systems.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Min-Soo Kim, Min-Soo Kim, Hyeong-Jik Kong, Hyeong-Jik Kong, Soo-Ho Baek, Soo-Ho Baek, Yu-Hwan Choe, Yu-Hwan Choe, Sung-Kyung Hong, Sung-Kyung Hong, } "The verification of UAV's autopilot system with realtime HILS", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60422I (2 May 2006); doi: 10.1117/12.664661; https://doi.org/10.1117/12.664661
PROCEEDINGS
6 PAGES


SHARE
Back to Top