2 May 2006 Kinematic modeling of mobile robot with rocker-bogie link structure
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60423M (2006) https://doi.org/10.1117/12.664769
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
A method for kinematic modeling of a mobile robot with rocker-bogie link mechanism was described. By using the well-known concept of the instantaneous coordinates, it derives the kinematic model for the full six degree of freedom motion including the x, y, and z motions and the pitch, roll, and yaw rotations. The kinematic model here implies both of the forward and the inverse kinematic equations. The forward kinematic equation with the wheel Jacobian matrices can be used to obtain the robot position and orientation from the measured wheel velocities and the rocker-bogie joint angles. On the contrary, the inverse kinematic equation implies a resulting robot motions consisting of body velocity and turning rate from the individual wheel velocities. Through the computer simulation, the kinematic model of the mobile robot was verified.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Taig-Gi Gang, Taig-Gi Gang, Soo-Yeong Yi, Soo-Yeong Yi, } "Kinematic modeling of mobile robot with rocker-bogie link structure", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60423M (2 May 2006); doi: 10.1117/12.664769; https://doi.org/10.1117/12.664769
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Safe motion planning for mobile agents a model of...
Proceedings of SPIE (February 28 1991)
Peer to peer model for the area coverage and cooperative...
Proceedings of SPIE (September 14 2004)
Multiple-model filtering
Proceedings of SPIE (July 29 1998)
Connectivity planning for closed-chain reconfiguration
Proceedings of SPIE (October 15 2000)

Back to Top